Rebirth RB-338 V2.0 Fix1: How to Install and Use the Software Synthesizer on Windows 10
FULL Rebirth RB-338 V2.0 Fix1: A Complete Guide
If you are a fan of electronic music production, you have probably heard of Rebirth RB-338, the legendary software that emulates the classic Roland TB-303 Bass Line Synthesizer, TR-808 Rhythm Composer, and TR-909 Rhythm Composer. Rebirth RB-338 was released in 1997 by Propellerhead Software, and it quickly became a cult favorite among techno, acid, and house music producers.
FULL Rebirth RB-338 V2.0 Fix1
However, Rebirth RB-338 was discontinued in 2005, and it became incompatible with modern operating systems. Many users were disappointed and frustrated by this decision, and they searched for ways to keep using their beloved software. Fortunately, thanks to some dedicated fans and developers, Rebirth RB-338 was revived and updated with a new version called Rebirth RB-338 V2.0 Fix1.
In this article, we will give you a complete guide on how to install and use Rebirth RB-338 V2.0 Fix1 on your Windows 10 computer. We will also show you what is new in this version, and how you can get the most out of it. Whether you are a beginner or an expert, you will find something useful and interesting in this article. So, let's get started!
What is Rebirth RB-338?
Rebirth RB-338 is a software synthesizer that simulates the sound and functionality of three iconic Roland machines: the TB-303 Bass Line Synthesizer, the TR-808 Rhythm Composer, and the TR-909 Rhythm Composer. These machines were widely used in the 1980s and 1990s by electronic music artists, especially in genres such as techno, acid, house, hip hop, and electro.
A brief history of Rebirth RB-338
The original Rebirth RB-338 was developed by Propellerhead Software, a Swedish company founded in 1994 by Ernst Nathorst-Böös, Marcus Zetterquist, and Peter Jubel. The idea behind Rebirth RB-338 was to create a software that could recreate the sound and feel of the Roland machines, without requiring expensive hardware or complicated setup.
Rebirth RB-338 was released in 1997 as one of the first software synthesizers for Windows and Mac OS. It was an instant success among electronic music producers, who praised its realistic emulation, intuitive interface, and creative possibilities. Rebirth RB-338 also introduced some innovative features, such as pattern-based sequencing, real-time control, song mode, pattern library, mod support, MIDI sync, and online collaboration.
Rebirth RB-338 was updated several times until 2005, when Propellerhead Software announced that they would stop developing and supporting it. They cited several reasons for this decision, such as the difficulty of maintaining compatibility What is new in Rebirth RB-338 V2.0 Fix1?
Rebirth RB-338 V2.0 Fix1 is not an official update from Propellerhead Software, but rather a fan-made patch that enhances and improves the original version of Rebirth RB-338. It was created by a group of developers and enthusiasts who wanted to keep Rebirth RB-338 alive and relevant in the modern music production scene. Here are some of the new features and improvements that Rebirth RB-338 V2.0 Fix1 offers:
The ReWire technology
One of the most significant additions in Rebirth RB-338 V2.0 Fix1 is the ReWire technology, which allows you to connect Rebirth RB-338 with other audio software, such as DAWs, sequencers, and samplers. ReWire is a protocol developed by Propellerhead Software that enables audio and MIDI data to be transferred between different applications in real time.
With ReWire, you can use Rebirth RB-338 as a virtual instrument or an effect in your favorite DAW, such as Ableton Live, FL Studio, Cubase, or Logic Pro. You can also sync Rebirth RB-338 with other ReWire-compatible software, such as Reason, Recycle, or Acid Pro. This way, you can expand your creative possibilities and integrate Rebirth RB-338 with your existing workflow.
To use ReWire with Rebirth RB-338 V2.0 Fix1, you will need to follow these steps:
Launch your ReWire host application (the DAW or software that will control Rebirth RB-338).
Create a new track or channel and select Rebirth RB-338 as the input source or the instrument.
Launch Rebirth RB-338 from the shortcut on your desktop or start menu. You will see a message saying that Rebirth RB-338 is running in ReWire mode.
Adjust the settings and preferences of Rebirth RB-338 as you normally would.
Start playing and recording with Rebirth RB-338 in your ReWire host application.
The improved user interface
Another noticeable improvement in Rebirth RB-338 V2.0 Fix1 is the user interface, which has been redesigned and optimized for better usability and performance. The user interface of Rebirth RB-338 V2.0 Fix1 has several advantages over the original version, such as:
A higher resolution and a larger size, which makes it easier to see and manipulate the controls and parameters.
A more modern and sleek appearance, which gives it a fresh and updated look.
A more intuitive and user-friendly layout, which makes it easier to navigate and access the different modules and functions.
A more customizable and flexible configuration, which allows you to adjust the appearance and behavior of the user interface according to your preferences.
To customize the user interface of Rebirth RB-338 V2.0 Fix1, you can use the options menu, which is located at the top right corner of the screen. From there, you can change the skin, the color scheme, the font size, the window mode, the zoom level, and more.
The additional sound banks and mods
Rebirth RB-338 V2.0 Fix1 also comes with a large collection of sound banks and mods, which are additional files that modify or enhance the sound and functionality of Rebirth RB-338. Sound banks are sets of presets that change the parameters of the TB-303s, TR-808s, and TR-909s. Mods are packages that change the graphics, sounds, effects, patterns, songs, and more.
The sound banks and mods included in Rebirth RB-338 V2.0 Fix1 are diverse and varied, covering different genres, styles, moods, and tastes. You can find sound banks and mods for techno, acid, house, trance, ambient, hip hop, drum and bass, dubstep, electro, rock, pop, jazz, and more. You can also find sound banks and mods that emulate other famous synthesizers and drum machines, such as the Roland TB-303, TR-808, TR-909, SH-101, MC-202, Juno-106, Jupiter-8, JX-3P, D-50, Alpha Juno, CR-78, CR-8000, TR-606, TR-707, TR-727, TR-626, LinnDrum, Oberheim DMX, Simmons SDS-V, Korg MS-20, Polysix, Mono/Poly, M1, Wavestation, Yamaha DX7, CS-80, TX81Z, RX5, Casio CZ-101, VL-Tone, SK-1, and more.
To use the sound banks and mods in Rebirth RB-338 V2.0 Fix1, you can use the mod selector menu, which is located at the top left corner of the screen. From there, you can browse and load the sound banks and mods that you want to use. You can also create your own sound banks and mods using the Rebirth RB-338 Mod Tool, which is a separate application that allows you to edit and customize the files of Rebirth RB-338.
How to use Rebirth RB-338 V2.0 Fix1?
Now that you have installed and configured Rebirth RB-338 V2.0 Fix1 on your Windows 10 computer, you are ready to start making some music with it. Rebirth RB-338 V2.0 Fix1 is a very easy and fun software to use, but it also has some advanced features and functions that can help you create professional and original songs. Here are some of the basic and essential steps on how to use Rebirth RB-338 V2.0 Fix1:
How to create and edit patterns
A pattern is a sequence of notes or steps that defines the melody or rhythm of a module. Rebirth RB-338 V2.0 Fix1 allows you to create and edit patterns for each module separately or together. You can also save and load patterns from the pattern library or from external files.
To create a pattern for a TB-303 module, you will need to follow these steps:
Select the TB-303 module that you want to use by clicking on its name at the top of the screen.
Click on the pattern button at the bottom of the screen to enter the pattern mode.
Use the cursor buttons to move between the 16 steps of the sequencer.
Use the keyboard buttons to enter notes on each step. You can also use the octave buttons to change the pitch range of the notes.
Use the slide button to add slides between notes. Slides create a smooth transition between notes by changing their pitch gradually.
Use the accent button to add accents to notes. Accents increase the volume and filter resonance of notes by adding extra envelope modulation.
Use the clear button to erase notes or steps from the sequencer.
Use the copy button to copy a pattern from one TB-303 module to another.
Use the random button to generate a random pattern for the TB-303 module.
To create a pattern for a TR-808 or TR-909 module, you will need to follow these steps:
Select the TR-808 or TR-909 module that you want to use by clicking on its name at the top of the screen.
Click on the pattern button at the bottom of the screen to enter the pattern mode.
Use the cursor buttons to move between the 16 steps of the sequencer.
Use the drum buttons to enter steps for each drum sound on the sequencer. You can also use the shift button to enter steps on the second row of the sequencer, which corresponds to the second half of the pattern.
Use the clear button to erase steps or drum sounds from the sequencer.
Use the copy button to copy a pattern from one TR-808 or TR-909 module to another.
Use the random button to generate a random pattern for the TR-808 or TR-909 module.
To edit a pattern for any module, you can use the following features:
The swing knob, which adds a subtle variation to the timing of the steps, creating a more natural and groovy feel.
The scale knob, which changes the length of the pattern by dividing or multiplying the number of steps.
The shuffle button, which rearranges the order of the steps in a random or preset way.
The reverse button, which plays the pattern backwards.
How to use the mixer and effects
Rebirth RB-338 V2.0 Fix1 has a mixer and effects section, where you can adjust the sound and quality of each module. The mixer and effects section has several controls and parameters, such as:
The level faders, which control the volume of each module.
The pan knobs, which control the stereo position of each module.
The mute and solo buttons, which silence or isolate each module.
The compressor knob, which applies a dynamic range compression to the master output, making it louder and more consistent.
The distortion knob, which applies a distortion effect to the master output, adding some grit and warmth.
The delay knob, which applies a delay effect to the master output, creating echoes and feedback.
The reverb knob, which applies a reverb effect to the master output, creating a sense of space and depth.
To use the mixer and effects section, you will need to follow these steps:
Select the mixer and effects button at the bottom of the screen to enter the mixer and effects mode.
Use the level faders to adjust the volume of each module. You can also use the master level fader to adjust the overall volume of Rebirth RB-338.
Use the pan knobs to adjust the stereo position of each module. You can also use the master pan knob to adjust the overall stereo position of Rebirth RB-338.
Use the mute and solo buttons to silence or isolate each module. You can also use the master mute and solo buttons to silence or isolate the entire Rebirth RB-338.
Use the compressor knob to apply a dynamic range compression to the master output. You can also use the compressor button to turn the compressor on or off.
Use the distortion knob to apply a distortion effect to the master output. You can also use the distortion button to turn the distortion on or off.
Use the delay knob to apply a delay effect to the master output. You can also use the delay button to turn the delay on or off.
Use the reverb knob to apply a reverb effect to the master output. You can also use the reverb button to turn the reverb on or off.
How to export and share your songs
Rebirth RB-338 V2.0 Fix1 allows you to export and share your songs in different formats and platforms. You can export your songs as audio files, MIDI files, Rebirth files, or ReWire files. You can also share your songs online with other Rebirth RB-338 users or with other music platforms.
To export your songs as audio files, you will need to follow these steps:
Select the file menu at the top of the screen and choose the export audio option.
Select the destination folder and name for your audio file.
Select the format and quality for your audio file. You can choose between WAV, MP3, OGG, or FLAC formats, and between 16-bit, 24-bit, or 32-bit quality.
Select the length and range for your audio file. You can choose between exporting the entire song, a loop, or a custom range.
Click on the export button to start exporting your audio file.
To export your songs as MIDI files, you will need to follow these steps:
Select the file menu at the top of the screen and choose the export MIDI option.
Select the destination folder and name for your MIDI file.
Select the tracks and channels for your MIDI file. You can choose between exporting all tracks, individual tracks, or custom tracks.
Select the length and range for your MIDI file. You can choose between exporting the entire song, a loop, or a custom range.
Click on the export button to start exporting your MIDI file.
To export your songs as Rebirth files, you will need to follow these steps:
Select the file menu at the top of the screen and choose the save or save as option.
Select the destination folder and name for your Rebirth file.
Click on the save button to start saving your Rebirth file.
To export your songs as ReWire files, you will need to follow these steps:
Launch your ReWire host application (the DAW or software that will receive Rebirth RB-338's audio and MIDI data).
Create a new track or channel and select Rebirth RB-338 as the input source or the instrument.
Launch Rebirth RB-338 from the shortcut on your desktop or start menu. You will see a message saying that Rebirth RB-338 is running in ReWire mode.
Adjust the settings and preferences of Rebirth RB-338 as you normally would.
Start playing and recording with Rebirth RB-338 in your ReWire host application.
Select the file menu at the top of the screen and choose the export ReWire option.
Select the destination folder and name for your ReWire file.
Click on the export button to start exporting your ReWire file.
To share your songs online with other Rebirth RB-338 users, you will need to follow these steps:
Select the online menu at the top of the screen and choose the upload option.
Enter your name, email address, song title, genre, and description for your song.
Select the destination website and category for your song. You can choose between uploading your song to the official Rebirth RB-338 website, or to other websites that support Rebirth RB-338 files, such as SoundCloud, YouTube, or Bandcamp.
Click on the upload button to start uploading your song.
Tips and tricks for Rebirth RB-338 V2.0 Fix1
Rebirth RB-338 V2.0 Fix1 is a powerful and versatile software synthesizer that can help you create amazing electronic music. However, there are some tips and tricks that can make your experience with Rebirth RB-338 V2.0 Fix1 even better and more enjoyable. Here are some of them:
How to optimize your performance and avoid errors
Rebirth RB-338 V2.0 Fix1 is designed to run smoothly and efficiently on most Windows 10 computers, but there are some factors that can affect its performance and cause errors. To optimize your performance and avoid errors, you can try these solutions:
Make sure that you have installed Rebirth RB-338 V2.0 Fix1 correctly, following the instructions in this article.
Make sure that you have updated your Windows 10 system and drivers to the latest versions.
Make sure that you have enough free space and memory on your computer.
Make sure that you have closed any unnecessary programs or processes that are running in the background.
Make sure that you have adjusted the audio settings of Rebirth RB-338 V2.0 Fix1 according to your computer's capabilities. You can access the audio settings from Here is the continuation of the article:
How to customize your Rebirth RB-338 experience
Rebirth RB-338 V2.0 Fix1 is a very customizable software synthesizer that allows you to change its appearance and behavior according to your preferences. You can customize Rebirth RB-338 V2.0 Fix1 in several ways, such as:
Changing the skin, which is the graphic design of the user interface. You can choose from different skins that are included in Rebirth RB-338 V2.0 Fix1, or you can create your own skins using the Rebirth RB-338 Skin Tool, which is a separate application that allows you to edit and customize the graphics of Rebirth RB-338.
Changing the color scheme, which is the combination of colors used for the user interface. You can choose from different color schemes that are included in Rebirth RB-338 V2.0 Fix1, or you can create your own color schemes using the options menu.
Changing the font size, which is the size of the text used for the user interface. You can choose from different font sizes that are included in Rebirth RB-338 V2.0 Fix1, or you can create your own font sizes using the options menu.
Changing the window mode, which is the way that Rebirth RB-338 V2.0 Fix1 is displayed on your screen. You can choose from different window modes that are included in Rebirth RB-338 V2.0 Fix1, such as full screen, windowed, or borderless.
Changing the zoom level, which is the magnification of the user interface. You can choose from different zoom levels that are included in Rebirth RB-338 V2.0 Fix1, or you can create your own zoom levels using the options menu.
How to access online resources and community support
Rebirth RB-338 V2.0 Fix1 is not only a software synthesizer, but also a part of a vibrant and active online community of electronic music producers and enthusiasts. You can access online resources and community support for Rebirth RB-338 V2.0 Fix1 in several ways, such as:
Visiting the official Rebirth RB-338 website, which is https://www.rebirthmuseum.com/. There you can find information about Rebirth RB-338's history, features, updates, downloads, tutorials, tips, tricks, and more.
Visiting the official Rebirth RB-338 forum, which is https://www.kvraudio.com/forum/viewforum.php?f=23. There you can interact with other Rebirth RB-338 users and developers, ask questions, share ideas, give feedback, report bugs, request features, and more.
Visiting other websites that support Rebirth RB-338 files, such as https://soundcloud.com/, <a href="(^4^